DataKubo logodatakubo
Access Dashboard

Your water meters send the data. Datakubo is what your customers see.

The white-label portal for water metering that saves you building and maintaining your own platform: connect the meters you have already fitted — whatever brand they are, not just the one that sold you the software — give every customer a portal under your brand and catch leaks automatically from the Starter plan. Your first customer is live in 30 minutes, without writing a line of code.

Activate your first customer in 30 minutesSee how Aqualinks caught a water leak

30-minute guarantee: if you don’t see decoded data, we set the account up for you and give you 3 months free · Technical support in Spanish

This is what you open every morning — not your customer

The management dashboard you work in: every community, every meter and every alarm in one place. Analytics and Alarms are the two screens that hold the service up — that is where the missing water shows up. Your customer logs into something else: their own consumption, in the portal under your brand.

Click the sidebar to move through the product.

portal.yourbrand.com/analytics

Platform

Operations

Insights

Admin

Analytics

Non-revenue water (NRW): the zone balance

Scope: Block B zone · 38 metersLast 30 days

Principal vs Children Consumption

Bars = principal meter · Line = sum of end-point meters

Principal:1,089.30 m³Children:1,022.98 m³NRW:66.32 m³ (6.1%)

Where are the 21.0 m³?

  • Habitual unmetered use9.0 m³
  • 5 meters missing a daily reading today~1.4 m³
  • Unexplained — inspect the zone10.6 m³

The assessment runs itself every 12 h, per zone. Nobody has to watch the chart.

Branded customer portal
Your logo, your colours, your domain. Every customer sees their own consumption and gets their own leak alert, included from the Starter plan.
Live in 30 minutes
Point your TTN, ChirpStack or data concentrator at Datakubo. No new hardware, no code.
Cut the emergency call-outs
The night-time leak alert goes straight to the resident’s email on its own, included from the Starter plan. You don’t take the 3 a.m. call and you don’t drive out to read a meter.
Settle consumption in one click
Export the monthly billing report ready to hand to your customer. No spreadsheets, no arguments about how the water was split.

Do your meters already report? Then they connect today

Any water meter that reports on its own works. If you already have a network, you keep your gateway and your operator — we don’t replace it, we sit on top of it. And if you don’t have one, you use the network managed by our LoRaWAN partner, quoted per site.

Technical detail: a POST to /api/v1/ingest/water-consumption in ChirpStack or TTN format.

  • LoRaWAN
  • NB-IoT
  • M-Bus via concentrator
  • ChirpStack
  • TTN
  • Your own middleware

Two ways to connect, per site

Chosen per site, and you can mix both in the same account. The portal, the alerts and your branding are identical: only who operates the network changes.

Your gateway or network server · €0

You already run a gateway, ChirpStack, TTN or a data concentrator.

  • Point your server at one webhook and stay in charge of your network
  • We never touch your gateways, your operator or your device provisioning
  • Live the same day — there is no rollout to wait for
Connect my network

Partner-managed network · quoted per site

You have no network of your own, or you would rather not run one. Subject to coverage.

  • Our LoRaWAN partner deploys and maintains the network
  • No servers to maintain and no LoRaWAN configuration on your side
  • You install the meters; the partner runs the network
Let DataKubo run it

The risk is ours

Two written guarantees, so setting this up can’t cost you an evening.

We are not asking you to spend your evenings fighting a payload. If something doesn’t work, we fix it, and it costs you nothing.

30 minutes
The 30-minute onboarding guarantee
We register your first customer’s webhook with you, on the call. If you are not seeing decoded data in your portal by the time we finish, we give you the first 3 months on us.
24 hours
The 24-hour decoder guarantee
Got a water meter with an odd or unsupported payload? Send us the datasheet and we write the decoder at no cost within 24 hours.

Both guarantees apply from day one, on any plan. No small print.

Three things your customer notices in the first month

You are not selling them sensors: you sell them the leak caught in time, the bill split without an argument, and the alert that arrives before the invoice does.

01Professional plan

Every meter watched against its own history

No single threshold fits everything: an empty house and a hotel in August look nothing alike. The platform learns what is normal for each meter and speaks up when that meter steps out of its own pattern. You configure nothing.

  • Compares every reading against the last 30 days of that same meter
  • Tells a sudden burst apart from the slow leak that takes days to show
  • Cross-checks the main meter against the sum of the individual ones and names the zone losing water
02

Automatic Consumption Billing

Close the period and download the meter-by-meter consumption report, ready to bill. No more splitting the bill by hand.

  • One-click period close
  • CSV and PDF export per customer
  • Every customer sees their own consumption
03

The meter’s own alarms, on the spot

Meters that ship alarms from the factory raise them on their own, and the alarm reaches your portal on the same uplink. No thresholds, no rules: the meter already knows when to speak up.

  • Leak, burst, reverse flow and overflow
  • Wrong installation and low battery: faults you catch before the phone call
  • A meter that stops reporting is flagged on its own too

Residents check their own use on their phone and stop calling you

It is what turns your service into something your customers notice every month — and what kills the call you always get: “that reading cannot be mine.”

  1. You invite them by email

    A direct access link. No users to create, no passwords to hand out.

  2. They log into their own access

    From their phone, on the portal with your brand and your domain.

  3. They see only their own

    Their meter, their consumption, their alerts. Their neighbours do not exist for them.

  • Current month consumption and a day-by-day breakdown
  • Their own leak alerts, which they can acknowledge
  • History from the day they became the holder: the previous one stays invisible
  • Every customer sees the volume of their own meter, nothing more

My water consumption

Meter 12 · Plot 12

This month

14.2 m³

−8% vs last month

Last 7 days

No alerts on your meter

What the resident sees on their phone, under your brand.

Pick the plan that matches the installations you run

Published prices, no hidden costs. This is what the platform costs you: what you charge your customer is yours to set and invoice.

The LNS is included on every plan. For each site you choose: your gateway with our LNS, your own LNS, or a managed LoRaWAN network run by our partner. Mix them in the same account.

AquaLinks found 66,320 L of unmetered water in one month, flagged by the platform on its own.

30-day free trial on both plans. When it ends you pick a plan or cancel: we never bill you without your explicit confirmation.

Starter

Most Popular
Portal, readings and leaks

For sole traders and installers starting with their first buildings.

€49/mo

20 meters included. €0.50 per extra meter per month.

A branded portal your customer can use from day one, with leak detection included from the very first meter.

  • DataKubo LNS
  • Real-time consumption view
  • Analytics and consumption history
  • Leak detection system
  • 3-year data retention
  • PDF reports for property managers
  • Multi-tenant management: buildings and communities kept separate
  • Basic branding: your company logo on the platform
  • Full export of readings
  • Email support, reply within 24 working hours
Start 30-day free trialBook a 30-minute call

Professional

Own brand and automation

For installers running several communities under their own brand, fully automated.

€199/mo

100 meters included. €0.35 per extra meter per month.

Everything in Starter, plus full white-label on your own domain, data pushed automatically to your systems and priority support.

  • Everything in Starter
  • Full white-label: your own domain (portal.yourcompany.com), no mention of Datakubo
  • Email alarm notifications
  • Outbound webhooks: data pushed automatically to your ERP or CRM
  • Priority support: direct line by phone and WhatsApp

💬 The extra-meter price drops from €0.50 to €0.35: the more meters you run, the less each one costs.

Start 30-day free trialBook a 30-minute call

Prices exclude VAT · No lock-in: cancel any month · Your data is yours, export it whenever you want · GDPR data processing agreement included: read the DPA

LoRaWAN connectivity

Your gateway + DataKubo LNS

Included

Install the gateway at each site and connect your meters. DataKubo includes the LNS to manage your devices and send their data to the platform.

Already have your own LNS?

You can also connect ChirpStack, TTN, a LoRaWAN carrier or any other compatible infrastructure.

Managed LoRaWAN network

Quoted per site

Don’t want to install or maintain gateways?

Through our partner, we can take care of deploying and maintaining the LoRaWAN infrastructure.

Pricing depends on coverage, the site and the number of devices.

Request a coverage study

Every plan includes

  • Live in 30 minutes once the network is up
  • Meter not supported? Free decoder within 24 hours
  • Support in Spanish and English
  • No setup fee

Live in 30 minutes with your gateway or the partner network already up, or your first 3 months are free.

Not sure your meters are supported, or whether your site has coverage?

Send us the meter model and the Google Maps pin of the site. We check both for free before you commit to anything.

Tell us about your setup
Enterprise

Large meter fleets, custom integrations, or specific compliance requirements.

Book a call

Common Questions

Do I need to replace TTN, ChirpStack, or my data concentrator?
No. Datakubo sits on top: keep TTN, ChirpStack or your data concentrator running your network, and Datakubo handles what your customers see. If you don’t run a network server at all, take the managed network route instead — our LoRaWAN partner deploys and maintains the network, and you never touch LoRaWAN configuration.
How long does setup take?
Under 30 minutes for the first customer. Add a webhook to your LoRaWAN server, create a customer, assign devices — done.
Can my customers log in without me being involved?
Yes. Each customer gets their own login on your branded portal. They see only their own devices and data — nothing else.
Is Datakubo really white-labeled?
Yes. Your logo and your colors on every plan, and your own custom domain (e.g. portal.yourbrand.com) included in Professional, where your customers never see Datakubo.
What hardware does Datakubo support?
Anything that runs on TTN, ChirpStack, or a data concentrator. If your devices already report into a LoRaWAN network server, they work with Datakubo.
What if my meters don't use LoRaWAN?
If your meters use walk-by or data concentrators instead of LoRaWAN, tell us about your setup — we evaluate custom integrations based on demand. Let's talk — 30-minute video call
What if I get stuck setting it up?
You don’t carry that risk. We register your first customer’s webhook with you, on the call. If you are not seeing decoded data in your portal by the time we finish, we give you the first 3 months on us. And if a meter sends an odd or unsupported payload, send us the datasheet and we write the decoder at no cost within 24 hours. We will never bill you without your explicit confirmation.
Can I cancel anytime?
Yes. No contracts, no commitments. Export your data, cancel from your dashboard, done.
Is Datakubo a general IoT platform, or only for water?
Only water. Datakubo is the platform built exclusively for remote water metering and smart water management — the dashboards, the AI leak detection, the zone balance and non-revenue water analysis, the consumption reports and the billing exports are all designed around the water meter, not adapted from a generic IoT tool. That is why it fits a water installer on day one. Want us to check it against your own deployment? Talk to us

The leak you have right now has been running for weeks.

Activate your first customer and find out tomorrow whether you are losing water. We validate your meter models on the call — and if one isn’t supported, we write the decoder free within 24 hours.

Open the live demoBook a 30-minute call